Air mega coway air purifier is the best in all of the market. They have five different models, powerful, effective, and stylish so that’s why many users can buy on their needs. Many users might have some difficulty or troubles around these machines because of Use many smart appliances .occasionaly, they act like the need for troubleshooting. if you have some problems with your coway air purifier, here is the following guide of troubleshooting that is actually helpful for you.
Cleaning of coway air purifier
First thing before you start clean to your air purifier, you confirm that your air purifier is unplugged. Another major thing is that don’t wash your purifier with chlorine, detergents, bleach, or many organic solvents. The third thing is that don’t sprinkle water on it or don’t immerse the purifier in water.
Cleaning with vent and detachable vent grille:
- Detachable vent grill lift to the top of the vent.
- For cleaning a grill or vent, you must use a vacuum cleaner or soft brush.
- While cleaning, you must notify them that don’t allow dust to enter your vent.
Cleaning air quality sensor:
- In a dusty environment, you should wash this part on regular bases or every two months.
- You must use a vacuum cleaner or soft brush to clean the air quality sensor.be careful that while cleaning, dust will not enter your vent.
- To open the air quality sensor, use slots or in the top rear of the purifier.
Cleaning front cover:
- The front cover will be removed by the purifier.
- You should use a soft brush and a soft dry cloth to stock all dust on the surface of the purifier.
- If there’s a lot of contamination In the purifier, then you should use damp clothes for wiping.
Cleaning body of purifier:
- Wipe your purifier with a vacuum cleaner or soft dry cloth.
- Don’t use abrasives when contamination is severe. You should use a damp dry cloth.
Cleaning pre-filter:
- Front upper part pull to open the cover.
- Pre-filter handle pull for taking it out.
- You should use a vacuum cleaner or water to remove dust for the severity of the contamination.
- You should clean these parts every 2-3 weeks.
Placing a coway air purifier:
Coway air purifier needs to be placed where there are no blocking obstacles in air circulation. You should place it where there is no direct sunlight. don’t put your purifier for safety precautions in the following places:
- Near a heating device, you don’t install it.
- In water, you don’t place your air purifier.
- You should not install it In rainy water or moisture-type locations.
- On a sloped surface, don’t install your purifier.
- Don’t install your purifier in combustible flammable gases places.
Installing a coway air purifier:
It uses three filters for use A large dust or mold can be removed by pre-filter; for removing odor we use a deodorization filter, or cigarette, smoke, and fine dust can be easily removed by HEPA filter.
- The upper part of the front pull for cover to open
- Exclude your pre-filter, take out or remove plastic packaging
- You should start assembling the purifier first using a HEPA filter, then a deodorization filter, or then a pre-filter.
Changes of filter in coway air purifier
In the usage environment, your replacement cycle for filter changing is in every 12 months. Keep the purifier at its optimal performance. I will recommend your use genuine Coway filters for optimal performance.
Change the deodorizing filter:
- Remove the pre-filter and open the front cover from the purifier
- Then take out the HEPA filter/ deodorizing filter
- Replace it with a new HEPA filter/ new deodorizing filter by removing plastic packaging
Light colour meaning in coway air purifier:
At the top of the filter, air contamination can be determined by the colour of the round lamp. What do the different colours mean? Here are some following:
- Blue colour means clean.
- Green colour (for some models) means slight.
- Yellow colour (for some models) means heavy.
- Dark purple (for some models) means polluted.
- A Red LED indicator means severe or highly polluted.
Red light fix in Coway air purifier
More than 2 hours. If the air quality stays at severe (red) even after the purifier runs, you can try fixing this by adjusting the particle sensor. For adjusting the sensitivity of the pollution sensor:
- Press and hold the airflow speed button and ionizer button (or mode button, depending on your purifier model) simultaneously for about 2 seconds second while the purifier is running.
- The speed indicator will flash at about 1.0 seconds intervals with a beep. The speed indicator blinks to show the sensor sensitivity.
- Adjust the sensitivity by pressing the speed button. The speed indicator blinks to show the sensor sensitivity as follows: speed steps 1-sensitive, speed step 2-standard, speed step 3-insensitive.
- Press the airflow speed button and ionizer (or mode) buttons simultaneously for about 2 seconds again. The air purifier will then resume normal operations.
- Note that if the airflow speed button and ionizer button are not pressed for 10 seconds after selecting sensitivity, the selected sensitivity is automatically input.
ADJUST THE AIR QUALITY SENSOR
- While the air purifier is on, press the airflow speed button and ionizer button for 2 seconds.
- The speed indicator will flash at 1.0-second intervals with a beep. The speed indicator blinks to show the sensor sensitivity.
- Adjust the sensitivity by pressing the speed button. The speed indicator blinks to show the sensor sensitivity.
- Press the airflow speed button and ionizer button for 2 seconds. The air purifier will then resume normal operations.
Reset the coway air purifier:
When you have replaced a filter before the filter replacement cycle is reached, you can forcibly reset the filter replacement cycle back to the factory default setting.
- When the reset function is not activated, press and hold the reset button for 2 seconds.
- Press the reset button to select the desired filter to forcibly reset. Press once: Odor LED (Deodorization Filter). Press twice: HEPA LED (True HEPA Filter).
- After you select the filter to reset, press and hold the reset button for 2 seconds, and then, the accumulated time in the electronic time counter is erased.
Resetting the filter replacement indicator
- The reset indicator blinks when the filter needs to be replaced.
- Odor LED: Deodorization Filter HEPA LED: True HEPA filter.
- The pollution level indicator will not turn on if the filter replacement indicator is activated.
- After replacing the filter, push the Reset button for 2 seconds.
Set up a Coway air purifier
- While the air purifier is on, press the airflow speed button and ionizer button for 2 seconds.
- The speed indicator will flash at 1.0-second intervals with a beep. The speed indicator blinks to show the sensor sensitivity.
- Adjust the sensitivity by pressing the speed button. The speed indicator blinks to show the sensor sensitivity.
- Press the airflow speed button and ionizer button for 2 seconds. The air purifier will then resume normal operations.
Specification of coway air purifier
Model: Its model is AP-1512HH
Rated voltage: Its voltage is almost 120 V~, 60 Hz. It has a single phase in a purifier.
Power consumption: Its power consumption is 77W.it has 2-grade devices for product insulation grade.
Dust collecting method: Its dust can be removed by the Mechanical dust collection method(HEPA filter).
Safety features: It is used for depends on whether the Fan motor is shut down when the front cover is open.
Installation place: It can be installed in indoor places.
The volume of air: The maximum volume in the air is 268.39 ft/min.
Size: It sizes is almost 16.81 inch(W) x 9.56 inch(D) x 18.30 inch (h).
Weight: It weighs 12.32lbs.
FAQS:
What does the red color mean in coway air purifiers?
Red light LED indicator means severe or highly polluted.
How do I reset my Coway air purifier?
The reset indicator blinks when the filter needs to be replaced. If the odor LED blinks, the deodorization filter needs to be replaced. If HEPA LED blinks, then the HEPA filter needs to be replaced.
How to Clean of coway air purifier?
First thing before you start clean to your air purifier, you confirm that your air purifier is unplugged. Another major thing is that don’t wash your purifier with chlorine, detergents, bleach, or many organic solvents. The third thing is that don’t sprinkle water on it or don’t immerse the purifier in water.
Conclusion:
First thing before you start clean to your air purifier, you confirm that your air purifier is unplugged. Another major thing is that don’t wash your purifier with chlorine, detergents, bleach, or many organic solvents. The third thing is that don’t sprinkle water on it or don’t immerse the purifier in water. Occasionally they act like they need troubleshooting. if you have some problems with your coway air purifier, here is the following guide of troubleshooting that is actually helpful for you.
